Vinh Hung TCC.,JSC Company Logo Vinh Hung TCC.,JSC

Bridge Bearing

Bridge Bearing

VHB Pot Bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) in compliance with standards TCVN 10268 : 2014, AASHTO LRFD: 2007 – Section 18, ASTM D

5212 – 03, BS5400, EN1337, KS4420. VHB Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with  a load capacity of up to 60000kN or above depending on projects’ requirements. VHB pot bearings have well-shaped structure, superior design, which are convenient for installation and maintenance during operation

 

VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis.

Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures.

 

Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings.

Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point.

Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements.

To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting      (Polyurethane),  hot       dip       galvanization according to ASTM A123 standards and especially the Al – Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours

View as :

(1 - 5 out of 5)

1

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Vinh Hung
Vinh Hung TCC.,JSC
* Subject
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.